LIQUIDMETAL TECHNOLOGIES INC Financials

Copyright © 2009 Yahoo! Inc. All rights reserved. Privacy Policy - Terms of Service - Copyright/IP Policy - Send Feedback Quotes delayed, except where indicated otherwise.Delay times are 15 mins for NASDAQ, 20 mins for NYSE and Amex. See also delay times for other exchanges.Fundamental company data provided by Capital IQ. Quotes and other information supplied by independent providers identified on the Yahoo! Finance partner page. Quotes are updated automatically, but will be turned off after 25 minutes of inactivity. Quotes are delayed at least 15 minutes. Real-...
Click here to read the whole Article (external link)

Liquidmetal® Technologies Reports Revenue of $3.5 Million for Second Quarter 2009

  Liquidmetal Technologies, Inc. Consolidated Statements of Operations Data (In thousands, except per share data)     For the three months ended       For the six months ended 6/30/2009   6/30/2008 6/30/2009   6/30/2008   (Unaudited) ...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 10-Q, Quarterly Report

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations This management's discussion and analysis should be read in conjunction with the condensed consolidated financial statements and notes included elsewhere in this report on Form 10-Q. This management's discussion and analysis, as well as other sections of this report on Form 10-Q, may contain "forward-looking statements" that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as "believe," "estimate," " project," "expect," "intend," "may," "anticipate," "plans," "seeks," and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the caption "Factors Affecting Future Results" in our Annual Report on Form 10-K for the fiscal year ended December 31, 2008 and other risks and uncertainties discussed in filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, Form 10-K, Form 8-K, and other filings). Liquidmetal Technologies disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise. Overview We are a materials technology company that develops and commercializes products made from amorphous alloys. Our Liquidmetal® family of alloys consists of a variety of coatings, powders, bulk alloys, and com...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 8-K, Amendments to Articles of Inc. or Bylaws; Change in Fiscal Year

Show all filings for LIQUIDMETAL TECHNOLOGIES INC | Request a Trial to NEW EDGAR Online Pro Form 8-K for LIQUIDMETAL TECHNOLOGIES INC 6-Aug-2009Amendments to Articles of Inc. or Bylaws; Change in Fiscal Year Copyright © 2009 Yahoo! Inc. All rights reserved. Privacy Policy - Terms of Service - Copyright/IP Policy - Send Feedback SEC Filing data and information provided by EDGAR Online, Inc. (1-800-416-6651). All information provid...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 8-K, Other Events

Show all filings for LIQUIDMETAL TECHNOLOGIES INC | Request a Trial to NEW EDGAR Online Pro Form 8-K for LIQUIDMETAL TECHNOLOGIES INC 8-Jul-2009Other Events Copyright © 2009 Yahoo! Inc. All rights reserved. Privacy Policy - Terms of Service - Copyright/IP Policy - Send Feedback SEC Filing data and information provided by EDGAR Online, Inc. (1-800-416-6651). All information provided "as is" for informational purposes only, not int...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 10-Q, Quarterly Report

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations This management's discussion and analysis should be read in conjunction with the condensed consolidated financial statements and notes included elsewhere in this report on Form 10-Q. This management's discussion and analysis, as well as other sections of this report on Form 10-Q, may contain "forward-looking statements" that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as "believe," "estimate," " project," "expect," "intend," "may," "anticipate," "plans," "seeks," and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the caption "Factors Affecting Future Results" in our Annual Report on Form 10-K for the fiscal year ended December 31, 2008 and other risks and uncertainties discussed in filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, Form 10-K, Form 8-K, and other filings). Liquidmetal Technologies disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise. Overview We are a materials technology company that develops and commercializes products made from amorphous alloys. Our Liquidmetal® family of alloys consists of a variety of coatings, powders, bulk alloys, and com...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 8-K, Entry into a Material Definitive Agreement, Creation of a Direct Fin

Item 1.01. Entry Into a Material Definitive Agreement. Effective May 1, 2009, Liquidmetal Technologies, Inc. (the "Company") completed a transaction (the "Transaction") in which (i) the holders of the Company's 8% Convertible Subordinated Notes exchanged such notes for a combination of new 8% Senior Secured Convertible Notes (the "Exchange Notes") and shares of a new series of convertible preferred stock designated "Series A-2 Preferred Stock", together with warrants thereon, and (ii) certain investors purchased, for an aggregate of $2.5 million in cash, shares of a new series of convertible preferred stock designated as "Series A-1 Preferred Stock" (together with the Series A-2 Preferred Stock, the "Preferred Stock"). The Transaction was consummated pursuant to a Securities Purchase and Exchange Agreement, dated May 1, 2009 (the "Securities Purchase Agreement"), among the exchanging note holders and investors (collectively, the "Buyers"). The principal purposes of the Transaction were to restructure the Company's indebtedness and to raise additional funding for working capital. In the Transaction, the Company issued: † 2,625,002 shares of Series A-2 Preferred Stock at an original issue price of $5.00 per share and having a conversion price of $.22 per common share, † to the Buyers acquiring the Exchange Notes, warrants to purchase to purchase an aggregate of 3,125,007 shares of the Company's common stock at an exercise price of $.60 per share (the "Exchange Warrants"), and † to the Buyers acquiring the Preferred Stock, warrants to purchase to purchase an aggregate of 42,329,407 shares of the Company's common stock at an exercise price of $.50 per share (the "Preferred Warrants"). The following are material terms and conditions of the Transaction and the Securities Purchase Agreemen...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 10-K, Annual Report

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations This management's discussion and analysis should be read in the conjunction with the condensed consolidated financial statements and notes included elsewhere in this report on Form 10-K. This management's discussion and analysis, as well as other sections of this report on Form 10-K, may contain "forward-looking statements" that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as "believe," "estimate," " project," "expect," "intend," "may," "anticipate," "plans," "seeks," and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the caption "Risk Factors" in Item 1A of this report and other risks and uncertainties discussed in filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, Form 10-K, Form 8-K, and other filings). Liquidmetal Technologies, Inc. disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise. OVERVIEW We are a materials technology company that develops and commercializes products made from amorphous alloys. Our Liquidmetal® family of alloys consists of a variety of proprietary coatings, powders, bulk alloys, and composites that utilize the advantages offered by amor...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 8-K, Change in Directors or Principal Officers

Show all filings for LIQUIDMETAL TECHNOLOGIES INC | Request a Trial to NEW EDGAR Online Pro Form 8-K for LIQUIDMETAL TECHNOLOGIES INC 8-Dec-2008Change in Directors or Principal Officers Copyright © 2009 Yahoo! Inc. All rights reserved. Privacy Policy - Terms of Service - Copyright/IP Policy - Send Feedback SEC Filing data and information provided by EDGAR Online, Inc. (1-800-416-6651). All information provided "as is" for informat...
Click here to read the whole Article (external link)

LIQUIDMETAL TECHNOLOGIES INC Files SEC form 10-Q, Quarterly Report

Item 2. Management's Discussion and Analysis of Financial Condition and Results of Operations This management's discussion and analysis should be read in conjunction with the condensed consolidated financial statements and notes included elsewhere in this report on Form 10-Q. This management's discussion and analysis, as well as other sections of this report on Form 10-Q, may contain "forward-looking statements" that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as "believe," "estimate," " project," "expect," "intend," "may," "anticipate," "plans," "seeks," and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the caption "Factors Affecting Future Results" in our Annual Report on Form 10-K for the fiscal year ended December 31, 2007 and other risks and uncertainties discussed in filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, Form 10-K, Form 8-K, and other filings). Liquidmetal Technologies disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise. Overview We are a materials technology company that develops and commercializes products made from amorphous alloys. Our Liquidmetal® family of alloys consists of a variety of coatings, powders, bulk alloys, and com...
Click here to read the whole Article (external link)